Table of Contents
Advertisement
SAFEStor User Guide
HDD Read Ahead
Cache
Stagger Power On
Control
HDD SMART Status
Polling
Disk Capacity
Truncation Mode
3.
Once all the attributes have been set, check the Confirm The Operation check box and
then click Submit to set the System Configuration parameters.
U320 SCSI Target Configuration
This function allows you to configure U320 SCSI targets. To configure U320 SCSI Targets,
follow the procedure below:
1.
From the navigation panel, select U320 SCSI Target Configuration. A list of U320
SCSI targets is displayed in the information pane.
Using the drop down list, select whether you want to Enable or Disable the Quick Arbitration
2.
Select or automatically step down to U160 transfer rates.
3.
Check the Confirm The Operation check box, then click Submit.
EtherNet Config
This function allows you to configure the Ethernet port for the enclosure. To configure the
Ethernet port, follow the procedure below:
1.
From the navigation panel, select EtherNet Config. The Ethernet parameters are
displayed in the information panel.
can support from the drop down list.
Sets the drives to read in more data than requested
in anticipation of a subsequent request for the data
This setting allows the drives to spin up in 0.5 second
increments (from 1 second onwards). The current
default setting is 0.4 seconds
This function will poll the drives for SMART status
Select how the disk capacity is to be truncated. For
Multiples of 10G
example, if you select
capacities will be rounded down to the nearest 10G.
Page 31
, all disk
Advertisement
Table of Contents
