Xerox SAFEStor User Manual page 53

SAFEStor User Guide
The Volume Creation option is displayed showing the current settings for the
volume set. The Volume Creation option allows you to select the Volume Name, RAID
level, Capacity, Stripe Size, SCSI or FC ID/LUN, Cache Mode, Tag Queuing and Max
Sync Rate. You can modify the default values in this menu by scrolling to the required
option and pressing Enter. Press Esc to save the value and return to the menu.
The following table shows the attributes that can be modified:
Volume Name
RAID Level
Capacity
The default volume name will always appear as Volume
Set. #. You can rename the volume set providing it does
not exceed the 15-character limit.
To set the RAID level for a Volume Set, highlight
Raid Level and press Enter. The available RAID levels for
the current Volume Set are displayed. Select the required
RAID level and press Enter to confirm.
The maximum size of the volume is always the
default setting. You can increase or decrease the capacity
using the UP and DOWN arrow keys.
Page 48