Configure Kdc - KoamTac KDC100 User Manual

Configure KDC

The KDC is designed to meet the data collection requirements of many different industries in a
variety of dynamic situations. To perform well in these diverse environments, the KDC is designed
to be configured easily and quickly. For the KDC to perform at its maximum level, the KDC must
be configured properly. Until you are familiar with configuring the KDC, it is recommended that you
DO NOT modify the KDC. The KDC can be configured in three different methods which are
explained in Section 2.5 – KDC Menus, Chapter 3 –Synchronization, and Appendix C – Special
Barcodes.
CONFIGURATION METHODS FOR THE KDC
• KDC Menu
• KTSync® Software
•
Special Barcodes –
Figure 4 - Location of Scroll Buttons
Currently only available for the KDC 100 / 200 / 200P only
Press UP and DOWN
Scroll Buttons
simultaneously to access
the KDC menu.
11
KDC100 User Manual