Status Command Menu; Line Status; Interface Status - Patton electronics CopperLink 2160 Series Getting Started Manual

Model 2160 Series Getting Started Guide

Status Command Menu

The status command menu lists commands for viewing the system status of interfaces on the Model 2160.
Move the cursor " >>" to status in the main menu and press Enter.
When you enter the status command, the following menu displays:
>> LINE Show LINE status
interface Show interface statistics status
Command
LINE The LINE status includes mode, line rate, SNR margin, attenuation, and CRC error count of
the local side modem, and SNR margin, attenuation and CRC error count of remote side
modem. The modem can access remote side information via EOC (embedded operation
channel).
interface Use the interface command to view the statistic status of the MGMT interface.

LINE Status

The LINE command shows the status of the Line port. Move the cursor " >>" to LINE in the status menu and
press Enter. The LINE status includes mode, line rate, SNR margin, attenuation, and CRC error count of the
local side Ethernet Extender, and SNR margin, attenuation and CRC error count of the remote side Ethernet
Extender.

Interface Status

To view the status of the MGMT interface, move the cursor " >>" to interface in the status menu and press
Enter.

Status Command Menu

Table 32. Status Command Menu
Description
Figure 51. LINE Status
Figure 52. Interface Status
5 • Console and Telnet configuration
87