Port-Based Priority Qos; Vlan Tag Priority Qos; Queue Schedule Options; Port-Based Priority Qos Options - Patton electronics CopperLink 2160 Series Getting Started Manual

Model 2160 Series Getting Started Guide
• SP services queues based on priority only. As traffic comes into the Model 2160, traffic on the highest prior-
ity queue, Q3 is transmitted first. When that queue empties, traffic on the next highest-priority queue, Q2
transmitted until Q2 empties, and then traffic is transmitted on Q1 and so on. If higher priority queues
never empty, then traffic on lower priority never gets sent. The SP class is typically for video applications
that require a fixed amount of bandwidth to be considered good quality.

Port-Based Priority QoS

-----------------------------------------------------------------------------
Command: setup qos portPri <1~6> <0~3>
Message: Please input the following information.
Port index <1~6>: 1
Queue index (ENTER for default) <3>: 3
-----------------------------------------------------------------------------
Set up the queue value (0, 1, 2 or 3) on each port.
Port
Queue Index

VLAN Tag Priority QoS

----------------------------------------------------------------------------
Command: setup qos vlanTagPri <0~7> <0~3>
Message: Please input the following information.
VLAN TAG index <0~7>: 0
Queue index (ENTER for default) <1>: 1
-----------------------------------------------------------------------------
Set up the queue index (0, 1, 2 or 3) on Priority VLAN Tag.
VLAN Tag Priority uses the tag field information which has been inserted into an Ethernet frame. If a port has
an 802.1Q-compliant device attached (such as this Ethernet Extender), these tagged frames can carry VLAN
membership information.
Priority defines the user priority level for different classes of traffic. There are 8 possible priority levels, with 0
being the lowest priority level and 7 being the highest level. Each Priority level can be set queue from 0 to 3.
Setup Command Menu
Table 26. Queue Schedule Options
Menu
Queue Schedule
Table 27. Port-Based Priority QoS Options
1 (LAN1) 2 (LAN2) 3 (LAN3) 4 (LAN4)
5 • Console and Telnet configuration
Options
Type 1 Type 2
5 (Line) 6 (Sniffing)
81