Exit Command - Patton electronics CopperLink 2160 Series Getting Started Manual

Model 2160 Series Getting Started Guide

Exit Command

To log out of the system without saving your changes, move the cursor " >>" to exit in the main menu and
press Enter.
enable Modify command privilege
setup Configure system
status Show running system status
show View system configuration
write Update flash configuration
reboot Reset and boot system
ping Packet internet groper command
admin Setup management features
utility TFTP upgrade utility
>> exit Quit system
-------------------------------------------------------------------------
Command: exit <CR>
Message: Please input the following information.
Do you want to disconnect? (y/n): y
-------------------------------------------------------------------------
Press "y" to exit the system. A confirmation screen displays:
------------------------------------------------------------------
Connection closed...
Press SPACE key to enter console mode configuration!
------------------------------------------------------------------

Exit Command

5 • Console and Telnet configuration
96