Operation; Front Panel Led Status Monitors - Patton electronics CopperLink 2113 User Manual

Once the CopperLink-T T1/E1 Extenders are properly installed, they
should operate transparently. No user settings required. This section
describes reading the LED status monitors.

4.1 FRONT PANEL LED STATUS MONITORS

Models 2113 and 2115 feature three front-panel LEDs that monitor power,
Ethernet signals, and the CopperLink connection. Figure 5 shows the front
panel location of each LED. Table 1 describes the LED functions.
LED
Power When lit, indicates the unit is powered on
Link •
•
•
Frame •
•
•

4.0 OPERATION

Power
LED
Figure 5. CopperLink-T T1/E1 Extender front panel
Table 1: Front panel LED description
On solid—link is connected
Off—No signal detected
Flashing — Data is being transmitted/received
On solid—T1/E1 frame is connected
Off — No signal detected
Flashing — Error detected
Link
LED
Description
13
- T
k ™
e r
L i n
n d
e r
x t e
p p
k E
C o
L i n
/ E 1
T 1
Frame
LED