Roof Marker Lamps - Chevrolet Silverado Classic 2007 Owner's Manual

Hide thumbs Also See for Silverado Classic 2007:
Table of Contents

Advertisement

5. Remove the old bulb from the bulb socket.
6. Install a new bulb into the bulb socket.
7. Reinstall the bulb socket into the turn signal
assembly and turn it clockwise until it locks.
The sidemarker lamps does not lock into place.
8. Reinstall the turn signal assembly back onto
the vehicle placing the hook and posts on the
inner side into the alignment holes first and
then the outer side into the retainer bracket.
Push until you hear a click.
9. Reinstall the headlamp assembly back into
the vehicle.

Roof Marker Lamps

To replace a roof marker lamp bulb, do the
following:
1. Remove the
two screws and lift
off the lens.
537

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents