Chevrolet Silverado Classic 2007 Owner's Manual page 316

INFO (Information): Press this knob to see
how long the current track has been playing.
ET and the elapsed time appears on the display.
To change the default on the display, track or
elapsed time, press the knob until you see
the desired display, then press and hold the knob
for two seconds. The radio produces one beep
and the selected display is now the default.
BAND: Press this button to listen to the radio when
a cassette tape or CD is playing. The inactive tape
or CD remains safely inside the radio for future
listening.
TAPE DISC: Press this button to play a cassette
tape or CD when listening to the radio. The inactive
tape or CD remains safely inside the radio for future
listening.
(Eject): Press this button to stop and eject a
Z
CD when it is not playing. Eject may be activated
with either the ignition or radio off. CDs may
be loaded with the radio and ignition off if this
button is pressed first.
316
CD Messages
If the CD comes out, it could be for one of the
following reasons:
•
It is very hot. When the temperature returns
to normal, the CD should play.
•
You are driving on a very rough road.
When the road becomes smoother, the
CD should play.
•
The CD is dirty, scratched, wet, or upside down.
•
The air is very humid. If so, wait about
an hour and try again.
•
There may have been a problem while burning
the CD.
•
The label may be caught in the CD player.
If the CD is not playing correctly, for any other
reason, try a known good CD.
If any error occurs repeatedly or if an error cannot be
corrected, contact your dealer. If the radio displays
an error message, write it down and provide it to
your dealer when reporting the problem.