Headlamps
The control on the driver's side of your instrument
panel operates the headlamps.
The headlamp control has four positions:
(Off): Turn the control to this position to
9
turn off the Daytime Running Lamps (DRL)
and the automatic headlamps.
AUTO (Automatic): Turn the control to this
position to activate the automatic headlamp mode.
(Parking Lamps): Turn the control to this
;
position to turn on the parking lamps, together
with the following:
•
Sidemarker Lamps
•
Taillamps
•
License Plate Lamps
•
Instrument Panel Lights
•
Roof Marker Lamps (If the vehicle has them)
(Headlamps): Turn the control to this
5
position to turn on the headlamps, together
with the previously listed lamps and lights.
Switch the headlamps from high to low-beam
by pushing the turn signal/high-beam lever
towards the instrument panel.
A circuit breaker protects the headlamps.
If you have an electrical overload, the headlamps
will flicker on and off. Have your headlamp
wiring checked right away if this happens.
219