Memory Seat and Mirrors
These buttons are used to program and recall
memory settings for the driver's seat and both
the driver's and passenger's outside mirrors.
The settings for these features can be saved for
up to two drivers.
To store the memory settings, do the following:
1. If you have an automatic transmission,
place the vehicle in PARK (P).
If you have a manual transmission,
set the parking brake.
12
If your vehicle has this
feature, the controls for
the memory function
are located on the
driver's door.
2. Adjust the driver's seat, including the seatback
recliner and lumbar, and both outside mirrors
to your preference.
3. Press and hold the 1 or 2 button of the memory
control for three seconds. A double chime will
sound to let you know that the position has
been stored.
To repeat the procedure for a second driver,
follow the preceding steps, but press the other
numbered memory control button.
To recall a memory position, do one of the following:
•
If you have an automatic transmission, press
and release the desired button 1 or 2 while
the vehicle is in PARK (P). A single chime will
sound and the memory position will be recalled.
If the vehicle is not in PARK (P), the memory
position will not be recalled.
•
If you have a manual transmission, press and
release the desired button 1 or 2 while the
parking brake is set. A single chime will sound
and the memory position will be recalled.
If the parking brake is not set, the memory
position will not be recalled.