Chevrolet Silverado Classic 2007 Owner's Manual page 327

AUTO EQ (Automatic Equalization): Press
AUTO EQ to select the equalization setting
while playing a CD. The equalization is stored
whenever a CD is played. For more information
on AUTO EQ, see "AUTO EQ" listed previously in
this section.
© ¨
SEEK : Press the left arrow to go to the
start of the current track, if more than ten seconds
have played. Press the right arrow to go to the
next track. If either arrow is pressed more
than once, the player continues moving backward
or forward through the CD.
© ¨
SCAN : To scan one CD, press and hold
either SCAN arrow for more than two seconds until
TRACK SCAN appears on the display and you
hear a beep. The radio goes to the next track,
plays for 10 seconds, then goes on to the
next track. Press either SCAN arrow again,
to stop scanning.
To scan all loaded CDs, press and hold either
SCAN arrow for more than four seconds until
ALL CD SCAN appears on the display and
you hear a beep. Use this feature to listen to
10 seconds of the first track of each loaded CD.
Press either SCAN arrow again, to stop scanning.
INFO (Information): Press this knob to see
how long the current track has been playing.
To change the default on the display, track
or elapsed time, press the knob until you see
the desired display, then press and hold the
knob until you hear a beep. The selected display
is now the default.
BAND: Press this button to listen to the radio
when a CD is playing. The inactive CD(s) remains
safely inside the radio for future listening.
CD AUX (Auxiliary): Press this button to play a
CD when listening to the radio. Inactive CD(s)
remains safely inside the radio for future listening.
327