Chevrolet Silverado Classic 2007 Owner's Manual page 66

2.3. When using a child restraint with a top
tether in the rear center position, route
the top tether through the fabric loop.
Then, raise the head restraint on the
passenger side and attach the top tether
to the metal anchor point located at the
rear passenger position.
2.4. Tighten the top tether when and as the
child restraint manufacturer's
instructions say.
3. Push and pull the child restraint in different
directions to be sure it is secure.
66
Crew Cab Models
1. If the child restraint manufacturer recommends
that the top tether be attached, attach and
tighten the top tether to the top tether anchor,
if your vehicle has one. Refer to the child
restraint instructions and the following steps:
1.1. To access the top tether anchors,
raise the seat cushion by pulling up
on the strap loop at the rear of the
seat cushion and fold the seat cushion
forward. Then fold the seatback
forward. See Rear Seat Operation
(Extended Cab) on page 18 or Rear
Seat Operation (Crew Cab) on page 18
for additional information.