Chevrolet Silverado Classic 2007 Owner's Manual page 199

2. Write down the eight to 12 switch settings
from left to right as follows:
•
When a switch is in the up position,
write "Left."
•
When a switch is in the down position,
write "Right."
•
If a switch is set between the up and down
position, write "Middle."
The switch settings that you wrote down in
Step 2 will now become the button
strokes you enter into the Universal Home
Remote in Step 4. Be sure to enter the
switch settings that you wrote down in Step
2, in order from left to right, into the
Universal Home Remote, when completing
Step 4.
3. From inside your vehicle, first firmly press
all three buttons at the same time for about
three seconds. Release the buttons to
put the Universal Home Remote into
programming mode.
4. The indicator lights will blink slowly. Enter each
switch setting from Step 2 into your vehicle's
Universal Home Remote. You will have two
and one-half minutes to complete Step 4. Now
press one button on the Universal Home
Remote for each switch setting as follows:
•
If you wrote "Left," press the left button in the
vehicle.
•
If you wrote "Right," press the right button in
the vehicle.
•
If you wrote "Middle," press the middle
button in the vehicle.
199