Heated Seats - Chevrolet Silverado Classic 2007 Owner's Manual

To increase or decrease support, hold the control
forward or rearward. Keep in mind that as your
seating position changes, as it may during
long trips, so should the position of your lumbar
support. Adjust the seat as needed.

Heated Seats

If your vehicle has this
feature, the buttons are
located on the front
doors. The engine must
be running for the
heated seats to work.
To heat the entire seat, press the horizontal
button with the heated seat and seatback symbol.
Press the button to cycle through the temperature
settings of high, medium and low and to turn
the heated seat off. Indicator lights will come on
to designate the level of heat selected: three
for high, two for medium, and one for low.
To heat only the seatback, press the vertical
button with the heated seatback symbol.
An indicator light on the seatback button will
come on to designate that only the seatback is
being heated. Additional presses of the seatback
button will cycle through the heat levels for the
seatback only. Press the horizontal button again
to heat the whole seat.
The heated seats will be canceled after the
ignition is turned off. If you still want to use
the heated seat feature after you restart your
vehicle, you will need to press the heated
seat button again.
11