Chevrolet Silverado Classic 2007 Owner's Manual page 312

3 REV (Reverse): Press this pushbutton to
quickly reverse the tape. The radio plays while the
tape reverses. Press it again to return to playing
speed. The station frequency and REV appears
on the display. Select stations during reverse
operation by using TUNE and SEEK.
4 FWD (Forward): Press this pushbutton to
quickly advance the tape. The radio plays while
the tape advances. Press this pushbutton
again to return to playing speed. The station
frequency and FWD appears on the display.
Select stations during forward operation by
using TUNE and SEEK.
X
5 SIDE: Press this pushbutton to play the
other side of the tape.
© ¨
SEEK : The right arrow is the same as
the NEXT pushbutton, and the left arrow is the
same as the PREV pushbutton. If either arrow
is held or pressed more than once, the player
continues moving forward or backward through
the tape. SEEK and a positive or negative
number appears on the display.
312
© ¨
SCAN : Press and hold either the SCAN
or the TYPE arrows for more than two seconds
until SCAN appears on the display and you
hear a beep. The radio goes to the next selection,
plays for 10 seconds, then goes to the next
selection. Press either the SCAN or the TYPE
arrows again, to stop scanning. The tape
must have at least three seconds of silence
between each selection for scan to work.
BAND: Press this button to listen to the radio
when a cassette tape or CD is playing. The
inactive tape or CD remains safely inside the
radio for future listening.
TAPE DISC: Press this button to play a cassette
tape or CD when listening to the radio. The
inactive tape or CD remains safely inside the
radio for future listening.
(Eject): Press this button to stop and eject
Z
a tape when it is playing or to eject a tape when
it is not playing. Eject may be activated with
the radio off.