Dic Operation And Displays - Chevrolet Silverado Classic 2007 Owner's Manual

4
(Customization): Press this button to access
the vehicle settings menu and customize the
personal settings on your vehicle.
r
(Select): Press this button to reset certain
DIC functions and set your customization settings.
Pressing any of the four DIC buttons will
acknowledge some DIC messages and clear
them from the DIC display.

DIC Operation and Displays

The Driver Information Center (DIC) comes
on when the ignition is on. After a short delay,
the DIC will display the information that was last
displayed before the engine was turned off.
The DIC has different modes which can be
accessed by pressing the four DIC buttons
located on the steering wheel. These buttons are
trip information, fuel information, customization,
and select. The button functions are detailed
in the following pages.
266
Trip Information Button
3
(Trip Information): Press the trip information
button to scroll through the ODOMETER,
TRIP A, TRIP B, TIMER, ENGINE HOURS,
and SELECTED RANGE.
Odometer: Press the trip information button
until ODOMETER appears on the display.
This mode shows the total distance the vehicle
has been driven in either miles or kilometers.
Pressing the reset stem located on the instrument
cluster with the vehicle off will also display
the odometer.
Trip A: Press the trip information button until
TRIP A appears on the display. This mode
shows the current distance traveled since the
last reset for TRIP A in either miles or kilometers.
Trip B: Press the trip information button until
TRIP B appears on the display. This mode
shows the current distance traveled since the
last reset for TRIP B in either miles or kilometers.
To reset TRIP A or TRIP B information, press
and hold the select button for one second while
in one of the trip modes. This will reset the
information for TRIP A or TRIP B.