Size Of The Partition To Be Created - NEC EXPRESS5800 N8800-096F User Manual

Size of the Partition to be Created

The required minimum size of a partition to install the system can be obtained from the following
formula:
Size required for installation + paging file size + dump file size
Size required for installation
Paging file size (recommended)
Dump file size
IMPORTANT:
The above paging file size is necessary for collecting debug information (memory
dump). If a value smaller than the "Recommended" value is set for the initial size of
the paging file, correct debug information (memory dump) may not be collected.
The maximum paging file size is 4095MB in a partition. If 1.5 times the size of
mounted memory is larger than 4095MB, set the size at 4095MB.
If the size of mounted memory is larger than 2GB, the maximum size of dump file is
"2048MB+12MB."
TIPS:
The mounted memory size means the total of memory installed on a single CPU/IO
module.
For example, if memory of 1GB is mounted, the required minimum partition size obtained from the
above formula is as follows:
3500MB + (1024MB
TIPS:
The minimum partition size you can specify in the Express Setup is 6072MB. The
partition size must be 6072MB or larger for automatic installation. Therefore the size
smaller than 6072MB cannot be specified.
= 3,500MB (Windows Server 2003 R2)
= size of memory mounted*
= size of memory mounted* + 12MB
1.5) + (1024MB +12MB) = 6072MB
Windows Setup 4-5
1.5