Filters Menu (Filters); Flicker Filter Adjustment Submenu (Flicker); Horizontal Filter Adjustment Submenu (H Filter); Encoder Adjustment Submenu (Encoder) - Extron electronics VSC 500 User Manual

Installation and Operation, cont'd

Filters menu (Filters)

The following flowcharts provides an overview of the Filters
menu.
Output
Config
MENU
Filters
NEXT
Figure 2-11 — VSC 500 Filters menu
Output
Config
MENU
Filters
NEXT
Figure 2-12 — VSC 700/700D Filters menu

Flicker filter adjustment submenu (Flicker)

Rotate the Adjust horizontal knob (
( ) to select from among four levels (0 to 3) of filtering to
reduce display output flicker. The default is 1.
2-18 VSC 500/700/700D • Installation & Operation
Flicker
NEXT
0
Flicker control
• 4 levels (0 - 3)
with a default of 1
Flicker H Filter
NEXT NEXT
0 0
Flicker control Horizontal filter
• 4 levels (0 - 3) • 4 levels (0 - 3)
with a default of 1 with a default of 3
Encoder
NEXT
0
Sharpness control
• 4 levels (0 - 3)
with a default of 2
) or Adjust vertical knob

Horizontal filter adjustment submenu (H Filter)

Rotate the Adjust horizontal knob (
( ) to select from among four levels (0 to 3) of horizontal
filtering to reduce loss of detail in the scan converted video
image. The default is 3.

Encoder adjustment submenu (Encoder)

Rotate the Adjust horizontal knob (
( ) to select from among four levels (0 to 3) of encoding to
maintain image sharpness. The default is 2.

Zoom menu (Zoom)

The following flowchart provides an overview of the Zoom
menu.
Filters
MENU
Zoom Hzm 0512
NEXT
Vzm 0512
Zoom control
• zoom in and out starting
with the current size
(default is 512)
Figure 2-13 — Zoom menu

Zoom in/out adjustment submenu (Zoom)

Rotate the Adjust horizontal knob (
( ) to adjust the zoom settings of a displayed image. The zoom
adjustment increases or decreases the overall size of an image
and is based on the current size setting. See Front Panel Features
in this chapter for a description of the Size button. The default
size is 512 both horizontally and vertically.
The default value for horizontal and vertical size is 0512.
The default values for the horizontal and vertical shift are
2048 and 1024, respectively. The actual minimum and
maximum values will vary and are based on the incoming
scan rate.
VSC 500/700/700D • Installation & Operation
) or Adjust vertical knob
) or Adjust vertical knob
NEXT
) or Adjust vertical knob
2-19