5.2 Setting the parameters
To modify the preset values of the parameters reported in the previous table, open the parameter
settings menu as follows:
O FF
P 00
P 00
P 01
REGULATION INSTRUCTIONS
110V 60Hz
S
110V 60Hz
S
110V 60Hz
S
110V 60Hz
S
27
1. Place the On/Off switch in the OFF
position.
2. Activate the On/Off switch while keeping
buttons „+‟ and "-" pressed. Wait for "P 00"
to appear on the display.
3. Release buttons „+‟ and „-‟.
4. Keep button „S‟ pressed and use button „+‟
and „-„ to select the parameter to modify.
5. Release button „S‟, then re-press and
release it. The display will indicate the value
of the parameter to modify.
Adjust the value of the parameter using the
procedure described in the following pages.