Product Conformity - PENSOTTI PCH 18 Instruction Manual

1.2 Product conformity

Pensotti North America declares that all its products are manufactured to a high specification and in compliance
with the relevant standards.
All PENSOTTI NORTH AMERICA boilers are CE certified and possess technical and functional characteristics that
comply with the following standards:
EN 483 for GAS-FIRED CENTRAL HEATING BOILERS TYPE C OF NOMINAL HEAT INPUT ≤ 70 kW
BOILERS WITH NOMINAL HEAT INPUT ≤ 70 kW
Gas fired boilers also comply with the following directives:
GAS APPLIANCES DIRECTIVE 90/396 CEE for CE compliance
LOW VOLTAGE DIRECTIVE 73/23 CEE
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 89/336 CEE
BOILER EFFICIENCY DIRECTIVE 92/42 CEE
The materials used such as copper, brass, stainless steel, etc. form a compact, homogeneous, highly functional
unit that is easy to install and simple to operate. In its simplicity, the wall-mounted appliance is equipped with all the
appropriate accessories required to make it a fully independent boiler capable of satisfying central heating needs.
All boilers are fully inspected and are accompanied by a quality certificate, signed by the inspector, and a guarantee
certificate. This manual must be kept in a safe place and must accompany the boiler at all times.
Pensotti North America will not be held responsible for any misinterpretation of this manual resulting from
the inaccurate translation of same.
Pensotti North America will not be held responsible for the consequences in the case of non-observance of
the instructions contained in this manual or in the case where actions not specifically described herein are
undertaken.
Pensotti North America declare that no substances harmful to health are contained in the appliance or
used during appliance manufacture and have not used or intend to use any of the following substances in
the manufacture of Pensotti North America heating products.
Asbestos
Mercury
CFC's.
GENERAL INFORMATION
3