PENSOTTI PCH 18 Instruction Manual page 34

36
S
P 07
S
1 8
S
P 08
S
. 9 – M
P
ARAMETER NO INIMUM GAS PRESSURE SETTING
Not applicable for premix burner (only for atmospheric burner)
.10 – M
P
ARAMETER NO INIMUM CENTRAL HEATING OUTPUT SETTING
Not applicable for premix burner (only for atmospheric burner)
.11 – M
P
ARAMETER NO AXIMUM GAS PRESSURE AND MAX
Not applicable for premix burner (only for atmospheric burner)
.12 –
P
ARAMETER NO IGNITION SEQUENCE SETTING
Not applicable for premix burner (only for atmospheric burner)
REGULATION INSTRUCTIONS
P
ARAMETER
6. Use buttons „+‟ and „-„ to modify the value of the
parameter within the prescribed limits
110V 60Hz
00 = 0 x 5" = 0"
90 = 90 x 5" = 450" (7.5 min)
The default value is 36 = 180" = 3 min
7. Press and release button „S‟ to confirm. The parameter
number (7) will appear on the display.
8. Switch off the appliance and switch it back on again to
render the new parameter operative.
110V 60Hz
P
ARAMETER
Not applicable
110V 60Hz
110V 60Hz
.
CENTRAL HEATING OUTPUT SETTING
7 – C
ENTRAL HEATING PUMP OVERRUN TIMER
8 – D.H.W
PUMP OVERRUN TIMER
30