Bowflex Revolution FT Assembly Instructions Manual page 15

Step 10 Remove Top Cover
Tools:
• 1/8" Allen wrench
10-1 Use a 1/8" Allen Wrench to remove the four
screws in the Top Cover, then remove
the Top Cover and set it aside. Set screws
aside for Step 16.
Step 11 Remove Styrofoam Inner Packing
11-1 Remove and discard the three pieces of
Styrofoam Inner Packing.
Note: You must open the plastic bag
and remove each piece of styrofoam
individually.
Assembly
Remove screws
Remove front piece first
Top Cover
Styrofoam Packing
1