Cisco UCS C200 Installation And Service Manual page 16

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Figure 1-2
and the 10/100 Ethernet management port are in slightly different positions for Generation M1).
Figure 1-2
1
3
5
7
The Cisco UCS C200 server has the following components and features:
.
Table 1-1
Feature or
Component
Enclosure
Processors
Memory
Storage
Disk
Management
PCIe I/O
Cisco UCS C200 Server Installation and Service Guide
1-2
shows the external features of the rear panel. A Generation M2 server is shown (the USB ports
Rear Panel Features
1
3
Power supply (up to two)
USB 2.0 connectors (two)
Video connector (DB15 VGA)
Low-profile PCIe card slot
Hardware Features of the Server
Cisco UCS C200 Server
Single rack unit (1RU) chassis.
Up to two quad-core Intel Xeon processors.
1
12 DIMM
Up to four internal SAS
Factory-configured RAID
RAID 0 and 1 support for up to four SATA drives with the integrated SATA
•
controller.
The integrated ICH10R RAID controller is not compatible for use with
Note
VMWare ESX/ESXi Server software.
RAID 0, 1, and 1E support for up to four SAS or SATA drives with the optional
•
LSI 1064-based controller mezzanine card.
RAID 0, 1, 5, 6, 00, 10, 50 and 60 support for up to four SAS or SATA drives
•
with the optional LSI MegaRAID SAS 9260 controller card.
See RAID Controller Considerations, page C-1
this server.
Up to two PCIe
One standard-profile, half-length, x16-lane, x16 connector (on riser card).
•
One low-profile, half-length, x8-lane, x8 connector (on riser card).
•
4
2 5 7
M
1/M
6
2 10/100 Ethernet management port (RJ-45)
4 Serial connector (DB9)
6
10/100/1000 Gigabit Ethernet ports (two)
8 Standard-profile PCIe card slot
slots supporting up to 96 GB of industry-standard DDR3
3 4
or SATA hard drives, supporting up to 4 TB total.
5
support options:
6
expansion cards, plugged into horizontal riser card sockets:
Chapter 1
8
2
2
for more information about RAID in
Overview
main memory.
OL-20732-02