The Hand Controller - visual engineering MKIIID User Manual

Camera User Manual

The Hand Controller

Connect the hand controller to the camera using the cable provided.
The hand controller should be connected to a suitable power source, the power source will power
the camera and the controller.
A suitable power source will require 12V and 1A (controller and camera power)
Preset Display
Joystick
Front Button 1
Front Button 2
The buttons and controls have the following functions.
Preset Display:
Joystick:
Front Button 1:
Front Button 2:
Rear Button 1:
Rear Button 2:
Rear Button 3:
Rear Button 4:
Subject to change without notice
Displays the current preset number.
Controls pan and tilt action
Quick press increments current preset number, long press sets current
position into current preset number.
Quick press decrements current preset number, long press recalls current
preset number into camera position.
Zoom In
Zoom Out
Manual Focus Near
Manual Focus Far.
Visual Engineering Technologies Ltd.
Rear Button 1
Rear Button 2
Rear Button 3
Rear Button 4
E&OE