Subscribe to Our Youtube Channel
Related Manuals for visual engineering SWZ
Summary of Contents for visual engineering SWZ
- Page 1 Visual Engineering Video solutions. Integrated November 2018 SWZ User Manual User Guide for the SWZ Switched Zoom PTZ Camera visualengineering.co.uk Page 1...
-
Page 2: Table Of Contents
Visual Engineering Video solutions. Integrated November 2018 Table of Contents Table of Contents ............... 2 Change History . -
Page 3: Change History
Visual Engineering Video solutions. Integrated November 2018 Change History Version Date Change Summary Author v1.0 9/9/2016 First Draft v1.1 14/9/2016 Kit Amendments v1.2 1/11/2017 Pinout Correction v1.3 21/11/2018 Connections Update visualengineering.co.uk Page 3... -
Page 4: About The User Manual
This is followed up with a description of technical specifications and dimensions. Warranty and Support All Visual Engineering products are supplied as standard with a 12 month ‘Return to Base’ warranty. In the event of a suspected product failure, users should contact the Visual Engineering support team on the telephone number +44 (0) 1206 211842 or please email us at: support@visualengineering.co.uk... -
Page 5: Kit Contents
Kit Contents The kit includes a SWZ switched zoom camera with either PAL or NTSC output video. The kit comes in a foam lined case and also contains the comms break out cable and a mains power supply with a range of wall connectors. -
Page 6: Connections
November 2018 Connections The SWZ kit includes a power comms break out cable, part number 110-3562. The cable assembly connects to the Fischer MiniMax connector on the base of the camera. All signals are then split out to their relevant connectors. -
Page 7: Configuring The Camera
November 2018 Configuring the Camera The SWZ can be configured for a specific user profile, to include; communications format & camera control protocol. Once configured the camera will remember these settings. The camera is configured using a control menu which is only accessible at power on. -
Page 8: Camera Options
From the Camera Option Menu select whichever function is required The order in which the different cameras in the SWZ are switched as it is zoomed in and out can be altered. • From the Camera Options menu type 2, Camera Zoom Order •... -
Page 9: Motor Options
Visual Engineering Video solutions. Integrated November 2018 Motor Options The configuration menus allows the user to set various motor settings in the camera. • From the Main Menu type 4, Motor Options • From the Motor Options Menu select whichever function is required The direction in which the camera is tilted can be inverted. -
Page 10: Software Control
November 2018 Software Control The SWZ camera supports serial communication control over RS232 and RS485. It supports PelcoD, PelcoP & Sony Visca protocols. The user may choose to use a software controller of their choice or use the VE Camera Controller. - Page 11 Now that the software application is connected the functions can be used. In the example below the pan right command has been selected. This will cause the SWZ camera to pan right. Similar commands for pan left, tilt up & down and zoom functions can also be tried out using the intuitive software user interface.
-
Page 12: Specifications
Visual Engineering Video solutions. Integrated November 2018 Specifications Specifications Camera Sensor 4 x 1/3” CMOS Protocol RS232/485 Visca, PelcoD Camera Sensitivity < 0.008 Lux Pan & Tilt Range 270° tilt, Continuous pan Camera Resolution >550TVL Pan & Tilt Drive Train DC Servo >50dB... -
Page 13: Dimensions
Visual Engineering Video solutions. Integrated November 2018 Dimensions ø 55 mm Visual Engineering Technologies LTD Kemps Farm Stanway Colchester Essex Tel: +44 (0)1206 211842 CO3 8NB Web: www.visualengineering.co.uk Email: sales@visualengineering.co.uk visualengineering.co.uk Page 13...
Need help?
Do you have a question about the SWZ and is the answer not in the manual?
Questions and answers