Specifications - Network Electronics Flashlink ETH1000MC User Manual

ETH1000MC

5 Specifications

Optical input:
Sensitivity:
Optical wavelength:
Transmission circuit fibre:
Return loss:
Detector damage threshold:
Max input power:
Connector:
Optical output:
Transmission circuit fibre:
Light source:
Optical wavelength:
Ethernet:
10BaseT/100BaseTx/1000BaseT on RJ-45 connectors, compliant with IEEE 802.3, IEEE 802.3u and
IEEE 802.3z, speed auto sensing and auto MDI/MDI-X. ETH1000MC supports jumbo frames up to
16000 bytes.
Electrical
Power:
Control:
Network Electronics ASA, P.O.Box 1020, N-3204 Sandefjord, Norway. Tel.: +47 33 48 99 99 - Fax: +47 33 48 99 98
E-mail: support@network-electronics.com - Web: http://www.network-electronics.com/
Technical specifications are subject to be changed without notice.
Better than –25dBm
1200nm – 1610nm
Single mode 9/125um compatible
>40dB with single mode fibre
>+1dBm
-6 dBm
SC/UPC
Single Mode
F-P/DFB Laser
See Laser Options below
+5V DC/2W
Control system for access to setup and module status with BITE
(Built-In Test Equipment)
Rev. 6
5