Versions; Overview - Network Electronics Flashlink ETH1000MC User Manual

Rev. 6
ETH1000MC

3 Versions

There is only one version of the ETH-1000MC.

4 Overview

®
flashlink
The ETH1000MC is a 1000Base-T to fibre converter module in the Network flashlink family.
The module converts a standard 1000 Mbit/s Ethernet signal on copper to fibre suitable for long haul
applications. The module has one electrical Ethernet port, and one fibre transceiver port (receiver fibre
connector and transmit fibre connector). The speed on the electrical connector is dependent of the DIP
switch setting. Speed will upon link connection automatically be set the highest possible. User can
independently enable or disable 10Mbit, 100Mbit or 1000Mbit. The fibre link can be used in one or two
fibre installations, or occupy two wavelengths in a WDM, CWDM or DWDM installation.
Network Electronics ASA, P.O.Box 1020, N-3204 Sandefjord, Norway. Tel.: +47 33 48 99 99 - Fax: +47 33 48 99 98
E-mail: support@network-electronics.com - Web: http://www.network-electronics.com/
Technical specifications are subject to be changed without notice.
4