SAFETY PRECAUTIONS • This unit should only be used on a level surface and is intended for indoor use only. XMARK Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.
This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our XMARK Fitness help line. We have trained service technicians on site to take care of you, our valued customer.
Page 6
Assembly NOTE: Wrench tighten bolts and nylon lock nuts. Attach two Support Frames (#2) to the Main Frame (#1) using: • two M10*20 Hex Head Bolts (#10) • two Φ11*Φ20*1.5 Flat Washers (#8) • two Φ10 Spring Washers (#12) Attach the Gear Hook (#11) to the Shaft (#3). NOTE: Mounting Hardware, Hex Screw ST9.5 x 75 (9) and Flat Washer 11 x 20 x 1.5 (8) are included for wall installation.
Parts List XM-2832 Parts List Ref # Part # Description P00854 Main Frame P00855 Support Frame P00856 Shaft P00857 Bearing ID20 P00858 Clip Φ42 P00859 Bearing 51104 P00860 Retaining Snap Ring P00031 Flat Washer Φ11*Φ20*1.5 P00839 Hex Screw ST9.5*75 P00861...