Ending A Call - Cisco IP Communicator User Manual

Ending a Call

To end a call, hang up. See the table below for details.
If you want to...
Hang up while using the handset Disable the handset or click EndCall. See the "Using a USB
Hang up while using the headset Click
Hang up while using the
speakerphone
Hang up one call but preserve
another call on the same line
You need to keep headset mode activated if you want to use AutoAnswer with your headset.
Tip
(First, your system administrator must configure AutoAnswer for you.) If you use a headset
but do not use AutoAnswer, you might still prefer to keep headset mode activated. For more
information, see the "Using Headsets and Other Audio Devices" section on page 46.
Related topics
• Placing a Call, page 20
• Answering a Call, page 22
• Transferring a Connected Call, page 25
Cisco IP Communicator User Guide
Then...
Handset" section on page 49.
, if lit.
If you want headset mode to remain active, keep the button lit by
clicking EndCall. See the "Using a Headset" section on page 46.
Click or EndCall. See the "Using Your Computer as a
Speakerphone" section on page 48.
Click EndCall. If necessary, first click Resume to remove the call
from hold.
Using Cisco IP Communicator to Handle Calls
23