Cisco IP Communicator User Manual page 47

Hide thumbs Also See for IP Communicator:

Table of Contents

How audio devices are displayed in audio mode menus

Audio mode menus are drop-down menus that contain one or more audio devices. (Right-click >

Preferences > Audio). Here is some information about what you might see in these menus:

• If you have only one audio device installed when Cisco IP Communicator launches, you will see

one audio device in each menu.

• Not all installed audio devices appear in audio mode menus. The devices that do appear are the

devices that require drivers (meaning USB handsets, USB headsets, and sound cards).

• Analog audio devices, which plug into the audio jacks on your computer, do not appear in your

audio mode menus. Cisco IP Communicator does not distinguish between analog audio devices

and your sound card. To select an analog device, select your sound card. (See the "Installing Audio

Devices" section on page 3 if you need help installing or identifying analog audio devices.)

• If you do not see an installed USB audio device or sound card in the menu, make sure the device

is inserted and re-launch Cisco IP Communicator. Cisco IP Communicator will only recognize

audio devices that are installed and plugged in when the application launches. (See the "Installing

Audio Devices" section on page 3 if you need help installing or identifying USB audio devices.)

Table of Contents

Need help?

Do you have a question about the IP Communicator and is the answer not in the manual?