Vga Display Connector - Advantech UNO-3074 User Manual

2.12 VGA Display Connector

The UNO-3074 provides a VGA controller (Intel 852/855GME GMCH/
ICH4 Chipset 400 MHz PSB) for a high resolution VGA interface. It sup-
ports CRT mode: 1280 x 1024 @ 32bpp (60Hz), 1024 x 768 @ 32bpp
(85Hz) and supports 8/16/32 MB frame buffer with system memory.
Note: UNO-3074 also support 16:9 flat screen.
Note: UNO-307x VGA chipsets is similar with commercial lap-
top VGA chipsets. Sometimes if there is no image on
the monitor, it might be that VGA signal doesn't output to
the monitor, just like when we connect a monitor to lap-
top VGA connector, we need to manually switch the
VGA output from laptop screen to external monitor. So
you could use hot key "CTRL+ALT+F1" to output the
VGA signal to monitor.
You can set the hot-key and other configuration for the VGA Graphics
(Please refer to the two images below)
35 Chapter 2