Usb Connector; Table 2.21:Programmable Buzzer Control Bit; Pcmcia: Pc Card Slot - Advantech UNO-3074 User Manual

Table 2.21: Programmable Buzzer Control Bit
Beep on
Short beep
Normal beep
Long beep
PS/2 Keyboard and Mouse Connector
The UNO-3074 provides a PS/2 keyboard and PS/2 mouse connector. A 6-
pin mini-DIN connector is located on the front panel of the UNO-3074.
UNO-3074 comes with an adapter in the accessory package (see section
1.5) to convert from the 6-pin mini-DIN connector to two 6-pin mini-DIN
connectors for PS/2 keyboard and PS/2 mouse connection. Please refer to
Appendix A.8 for its pin assignments.

2.10 USB Connector

The USB connector is used for connecting any device that conforms to the
USB interface. Many recent digital devices conform to this standard. The
USB interface supports Plug and Play, which enables you to connect or
disconnect a device whenever you want, without turning off the computer.
The UNO-3074 provides four connectors of USB interfaces. The USB
interface complies with USB UHCI, Rev. 2.0 compliant. The USB inter-
face can be disabled in the system BIOS setup. Please refer to Appendix
A.9 for its pin assignments.

2.11 PCMCIA: PC Card Slot

The UNO-3074 provides one PC Card slot that supports CardBus (Card-
32) cards and 16-bit (PCMCIA 2.1/JEIDA 4.2) card standards. It supports
+3.3 V , +5 V and +12 V @ 120 mA working voltage. The PC Card is 85.6
mm long by 54 mm wide (3.37" x 2.126"), using a 68-pin connector and a
removable module standardized by PCMCIA that is known as "PCMCIA
card"
Note: PCMCIA interrupt assignment is IRQ 9. If you use
Win2000 OS you need to check the IRQ manually.
UNO-3074 User Manual
SPKS1
0
0
1
1
32
SPKS0
0
1
0
1