Mellanox Technologies MTS3600Q-1BNC User Manual page 12

12
For Special Regulations Regarding Finland, Sweden, Denmark, and Norway see Section G,"Special Regula-
tions Regarding Finland, Sweden, Denmark, and Norway," on page 38.
1. Installation Instructions
2. Over-temperature
3. Stacking the Chassis
4. Redundant Power Supply Connection - Electrical Hazard
5. During Lightning - Electrical Hazard
6. Copper InfiniBand Cable Connecting/Disconnecting
7. Rack Mounting and Servicing
8. Equipment Installation
Rev 2.0.0
Read all installation instructions before connecting the equipment to the power
source.
This equipment should not be operated in an area with an ambient temperature
exceeding the maximum recommended: 45°C (113°F). Moreover, to guarantee
proper air flow, allow at least 8cm (3 inches) of clearance around the ventilation
openings.
The chassis should not be stacked on any other equipment. If the chassis falls, it
can cause bodily injury and equipment damage.
This product includes a blank cover over the space for the redundant power sup-
ply. Do not operate the product if the blank cover is not securely fastened or if it
is removed.
During periods of lightning activity, do not work on the equipment or connect or
disconnect cables.
Copper InfiniBand cables are heavy and not flexible, as such they should be
carefully attached to or detached from the connectors. Refer to the cable manu-
facturer for special warnings and instructions.
When this product is mounted or serviced in a rack, special precautions must be
taken to ensure that the system remains stable. In general you should fill the
rack with equipment starting from the bottom to the top.
This equipment should be installed, replaced, or serviced only by trained and
qualified personnel.
Mellanox Technologies