Tag-Based Group - SignaMax 065-7726SPOE User Manual

3-7-2. Tag-based Group

Function name:
Tag-based Group Configuration
Function description:
It shows the information of existed Tag-based VLAN Groups. You can also
easily create, edit and delete a Tag-based VLAN group by pressing <Add>,
<Edit> and <Delete> function buttons. User can add a new VLAN group by
inputting a new VLAN name and VLAN ID after pressing <Add> button.
Parameter description:
VLAN Name:
The name defined by administrator is associated with a VLAN group.
Valid letters are A-Z, a-z, 0-9, "
length is 15 characters.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based and Double-tag mode.
Member:
This is used to enable or disable if a port is a member of the new added
VLAN, "Enable" means it is a member of the VLAN. Just tick the check
box beside the port x to enable it.
™ ™ ™ ™
Signamax 065-7726SPOE 24-Port 10/100BaseT/TX
Fig. 3-22
75
PoE Managed Switch User Manual
-
" and "_" characters. The maximal
Publication date: November, 2005
Revision A0.92