Table of Contents
Advertisement
Signamax switches support different VLAN types according to different VLAN division modes.
Signamax switches support following VLAN types.
Port-based VLAN
MAC-address-based VLAN
IP-subnet-based VLAN
Protocol-based VLAN
Configure Port-based VLAN
Port-based VLAN is to take a port as a member of the VLAN and add it into the VLAN. The port
can forward packets of the VLAN to which the port belongs.
M o d e T yp e s o f Po r ts
Port modes are divided into three types according to different processing modes for Tag labels
of packets when the port transmits packets.
Access Type
The port can belong to only one VLAN, and the default VLAN ID of the port is the same as the
VLAN ID to which it belongs. The port usually connects with user devices. The default type of a
port is the Access type.
Trunk Type
The port permits multiple VLANs to pass, and it can receive or send multiple VLAN packets.
Only the packets of the default VLAN can be sent without Tag labels. The port is usually used
to inter-connect network devices.
Hybrid Type
The port can be added into multiple VLANs, and it can receive or send multiple VLAN packets.
The packets of multiple VLANs can be sent without Tag label. The port also can be used to
connect user devices or inter-connect network devices
111 SIGNAMAX LLC • www.signamax.eu
Advertisement
Table of Contents
