Table of Contents
Advertisement
Signamax 065-7840 24-Port 10/100/1000BaseT/TX Managed Switch
3-10-2. Tag-based Group
Function name:
Tag-based Group Configuration
Function description:
Shows the information of existing Tag-based VLAN Groups. You can also
easily create, edit and delete a Tag-based VLAN group by pressing the <Add>,
<Edit>, and <Delete> function buttons. The user can add a new VLAN group
by inputting a new VLAN name and VLAN ID.
Parameter description:
VLAN Name:
The name as defined by the administrator that is associated with a VLAN
group. Valid characters are A-Z, a-z and 0-9. Other special characters
will not be accepted. The maximum length is 15 characters.
VID:
VLAN identifier. Each tag-based VLAN group has a unique VID. It
appears only in tag-based and Double-tag mode.
SYM-VLAN:
While the SYM-VLAN function of the group is enabled, all packets with
this group VID will be dropped in case they are transmitted from the ports
that do not belong to this group.
Member:
This is used to enable or disable a port's membership in a newly added
VLAN. "Enable" means it is a member of the VLAN. Just tick the check
)
box (
beside the port x to enable it.
Fig. 3-27
74
Advertisement
Table of Contents
