Forwarding Callers To A Text Message - iPECS LIP-8012E User Manual

LIP-8012E & LIP-8024E Gigabit Phone
In iPECS-MG
To activate Call Forward, Off Premise (forward to an
external number) from your phone:
•
Lift the handset,
•
Press the Fwd Soft button or dial 554
•
Dial the type of Forward code (1-4),
•
Dial Telephone number,
•
Replace the handset, return to idle.
To activate Call Forward, Off Premise (forward to an
external number) from a different phone:
•
Lift the handset,
•
Press the Fwd Soft button or dial 554,
•
Dial 0 (Remote Call Forward code),
•
Dial your Authorization code (your Station number +
Password),
•
Dial the type of Forward code (1-4),
•
Dial Telephone number,
•
Replace the handset, return to idle.
3.8.3

Forwarding callers to a Text Message

Using an iPECS Phone, the system can be setup to
return a 'Text Message' to internal callers. When calling
your Station, internal callers will automatically receive
the selected message or you can send a text message
you select in response to an internal call, Silent Text
Message.
There are 11 Custom Display Messages each up to
24 characters. Ten can be assigned by the Attendant
and one assigned by you.
In addition, there are ten fix Pre-Defined Text Messages;
some allow auxiliary input for time, date, etc. (as shown
in message list).
In iPECS-LIK
Message 01:
Message 02:
Message 03:
Message 04:
Message 05:
LUNCH RETURN AT hh:mm
ON VACATION
RETURN AT DATE mm:dd
OUT OF OFFICE
RETURN AT TIME hh:mm
OUT OF OFFICE
RETURN AT DATE mm:dd
OUT OF OFFICE
RETURN UNKNOWN
26
User Guide