Maintenance - Axminster 200387 User Manual

Keep the saw as clean and free from saw dust build up as is practical.
Periodically, remove the saw gullet and blow out brush out clean out the saw box and the
extraction hosing. Remove any resin build up in the saw box, using a proprietary resin
cleaner.
Remove the upper side panels and clean the threaded drive shafts of the rise and fall and
tilt mechanisms. At the same time check the belt drive, i.e. the belt is not 'glazing' with resin
build up, likewise with the pulley wheels. Check the belt tension. If the belt is becoming
slack, loosen the motor hold down bolts and drive the motor backward with its adjusting
bolt. See fig 25.
Check the saw blade regularly for chipped, missing, damaged teeth etc. and remove any
resin build up from the blade, riving knife etc.
Motor hold
down bolts
Fig 25
FREEPHONE

Maintenance...

0800 371822
W
A X M I N S T E R
W H I T E
adjusting bolt
33