Initial Assembly Instructions - Axminster 200387 User Manual

Maximum throat before the Saw with slide rails fully forward:
Supported length behind the saw blade:
Table height:
Tilt Angle:
Minimum Kerf:
Maximum Depth of Cut (at 90˚ degrees):
Maximum Depth of Cut (at 45˚ degrees):
Noise measurements to EN 50144
Lpa (sound pressure):
Lwa (acoustic power):
Weight:
!
Please read through the Section entitled Parts identification and Description, this will enable
you to more readily identify those parts of the saw to which we will be referring.
PLEASE NOTE. Some of this assembly procedure is best accomplished
by two persons. Although the tasks are not impossible, some of the
items are heavy and awkward, and a mishandling error could cause
injury. Please think about what you are doing, your capabilities and your
personal safety. We have added the 'two person symbol' to any
TWO PERSON
SYMBOL
operation that we recommend should be a two person task.
You will require: A cross point screwdriver in addition to the tools supplied
Unpack all the boxes and check all the components against the "What's in the Boxes' List. If
any parts or components are missing, please contact our customer services department
using the procedures and telephone numbers listed in our catalogue, and you will be dealt
with quickly and efficiently.
PLEASE NOTE: that, on occasion, the packing list is not strictly adhered to, please check
all the boxes, packets etc, to make sure that all the parts have been accounted.
IT IS RECOMMENDED THAT YOU WEAR EAR
PROTECTION WHEN USING THIS MACHINE

Initial Assembly Instructions...

FREEPHONE
Specification...
AW10BSB2 (75mm) or AW12BSB2 (100mm)
AW10BSB2 (60mm) or AW12BSB2 (75mm)
10" (260kg) or 12" (312kg )
0800 371822
W
A X M I N S T E R
W H I T E
1220mm
900mm
845mm
0-45 degrees
3mm
dB(A) 99.5
dB(A) 112.5
09