General Instructions For 230V Machines - Axminster 200387 User Manual

What's in the Box Part 3...
W
A X M I N S T E R
W H I T E
Pkt containing:
10 No.
4 No.
4 No.
Box 3
1 No.
Box 4
2 No.
1 No.
1 No.
1 No.

General Instructions for 230v Machines...

Good Working Practices/Safety
The following suggestions will enable you to observe good working
practices, keep yourself and fellow workers safe and maintain your
tools and equipment in good working order.
!
Primary Precautions
These machines are supplied with a moulded 13 Amp. Plug and 3 core power cable. Before
using the machine inspect the cable and the plug to make sure that neither are damaged. If
any damage is visible have the damaged item inspected/repaired by a suitably qualified
person. If it is necessary to replace the plug, it is preferable to use an 'unbreakable' type
that will resist damage on site. Only use a 13 Amp plug, and make sure the cable clamp is
tightened securely. Fuse as required. If extension leads are to be used, carry out the same
safety checks on them, and ensure that they are correctly rated to safely supply the current
that is required for your machine.
06
M8 x 25mm Square Head Bolts, nuts and washers (fixing fence rails)
M8 x 20mm Hex Head Bolts and washers (fixing inner extension leaf)
M8 x 30mm Hex Head Bolts, nuts and 2 x washers (fixing outer extension leaf)
Slide Rail assembly for sliding table
Mounting Brackets for Slide Rail Assembly
Sliding Table (with Bearing Bogies assembled)
Rear extension table top
Manual
WARNING!!
www.axminster.co.uk
KEEP TOOLS AND EQUIPMENT OUT
OF THE REACH OF YOUNG CHILDREN
Mains Powered Tools