Specifications - Axminster 200387 User Manual

General Instructions for 230v Machines...
W
A X M I N S T E R
W H I T E
DO NOT use this machine within the designated safety areas of flammable
liquid stores or in areas where there may be volatile gases. There are very
expensive, very specialised machines for working in these areas, THIS IS
NOT ONE OF THEM.
Check that cutters, drills, blades etc., are the correct type and size, are undamaged
and are kept clean and sharp, this will maintain their operating performance and lessen the
loading on the machine.
If possible always fit dust extraction to machines that are producing high rates of sawdust,
shavings, chips etc.
Above all, OBSERVE.... make sure you know what is happening around you, and USE
YOUR COMMON SENSE.
REMEMBER, YOU ARE ULTIMATELY REPONSIBLE FOR YOUR OWN SAFETY
THIS MACHINE IS DESIGNED TO CUT TIMBER AND TIMBER DERIVATIVE
PRODUCTS. DO NOT use for any other materials.
Specification...
Axminster No.
Motor Single phase 230V, 50 Hz:
Blade Speed:
Blade Diameter:
Bore Size:
Table Size:
Table Size with 2 side extensions
fitted(305 X 800 ea.):
Table Size with rear extension fitted
(boundary dimensions):
Sliding Table Dimensions:
Continues on next page....
08
www.axminster.co.uk
AW10BSB2
200387
2.2kW
2840rpm
10" (254mm)
30mm
10" (560mm x 800mm)
W 1170mm x D 800mm
AW12BSB2
600890
3kW
2840rpm
12" (315mm)
30mm
12" (560mm x 845mm)
W 1480mm x D 800mm
W 1170mm x D 1500mm
500mm x 400mm