Table of Contents
Advertisement
Page: 47
Service Guide OKIPAGE4w
Chapter 3 Parts Replacement
Base Plate
(1) Remove the upper cover assy. (See Upper Cover Assy in this Chapter).
(2) Remove the base frame. (See Separator Guide in this Chapter).
(3) Remove two screws 1, disconnect connector 2, and remove power supply unit 3.
(4) Remove insulation sheet 4.
(5) Remove two screws 5 and remove main control board 6 from base plate 7.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Advertisement
Table of Contents
