Table of Contents
Advertisement
Preparation Before Troubleshooting
(1) Message display
The failure status of the OKIPAGE 4w is displayed on the status monitor of the PC.
Take proper action according to the message displayed on the status monitor.
(2) LED display
The OKIPAGE 4w is equipped with only one LED. This LED indicates status as follows:
Printer Status
Ready
Printing in progress
Recoverable alarm
Unrecoverable alarm
*1: The LED blinks at a cycle of 1 second (0.5s ON) from data reception to printing end.
*2: The LED blinks at a cycle of 0.24 second (0.12s ON).
*3: The LED blinks at a cycle of 0.24 second (0.12s ON).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OKIPAGE4w
Chapter 6 Troubleshooting Procedures
LED Indication
Lighting
Blink (*1)
Blink (*2)
Blink (*3)
Page: 56
Advertisement
Table of Contents
