Oki Okipage4w Service Manual page 85

Paper size error Paper Size Error
Paper jam Paper Input Jam
Paper jam Paper Feed Jam
Paper Jam Paper Exit Jam
Cover Open Cover Open
Buffer overflow Page Buffer
Overflow
Buffer overflow Print Over Run
Device Program ROM
configuration error Check Error
30 00 Paper of improper size
was fed. 2.52" (64 mm) L
15.77" (400.56 mm)
31 00 A paper jam occurred
when sheets of paper
were being supplied.
32 00 A paper jam occurred
during paper feeding.
33 00 A Paper jam occurred
during paper ejection.
4F 00 The upper cover is open.
40 01 The page buffer
overflowed because there
are a large number of print
data.
40 10 A print overrun occurred
because print data is
complicated.
60 10 An error occurred during
program ROM check.
Check the paper.
Also check whether
more than one sheet
of paper were fed
simultaneously. To
clear the error
display, open the
cover, then close it.
Check the paper. To
release the error
display, open the
cover, then close it.
Open the cover,
then remove the
jammed paper. To
clear the error
display, close the
cover.
Open the cover,
then remove the
jammed paper. To
clear the error
display, close the
cover.
To clear the error
display, close the
cover. If this error
occurs frequently,
replaced the power
supply board.
To release the error
display, press the
reset button on the
status monitor of the
printer driver. Install
option RAM or
reduce the number
of print data.
To clear the error
display, press the
reset button on the
status monitor of the
printer driver.
Simplify the print
data format.
Replace program
ROM or the main
control board.
(When replacing the
main control board,
also adjust
EEPROM data).