Page: 48
Service Guide OKIPAGE4w
Chapter 4 Adjustment
ADJUSTMENT
This chapter explains adjustment necessary when a part is replaced.
This adjustment is made by changing the parameters values set in EEPROM on the main control board.
The printer driver or maintenance utility can be used to change these values.
Only service and maintenance personnel may use the maintenance utility. This utility cannot be made
public for end users.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business Partner
Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)