B-1 Error Code On Acu; B-2 Error Code On Scs; Appendix B: Error Code Definition - KNS SUPERTRACK S4 Installation And Operation Manual

Appendix B: Error Code Definition

If there is a problem with the antenna, you can check the error code on the ACU
and SCS. Press the 'MENU' button on the front panel of the ACU when the error
LED is on. Then, you will see the hexadecimal error code, as shown in Fig C-1
below.
You will also be able to see the hexadecimal error code on the SCS V 1.7.1, as
shown in Figure B-2 below.
Figure B-1 Error Code on ACU
Error LED Error Code
Figure B-2 Error Code on SCS
69