How To Operate Scs - KNS SUPERTRACK S4 Installation And Operation Manual

4. How to Operate SCS

Installer or operator can change parameters by SCS(SuperTrack Control Software)
Version 1.7.1 or 1.7.2. Also SCS can show the current status of S4.
NOTE: SCS version is depend on the PCU software as below
SCS Version PCU Version & Antenna
1.5 S3, Z4, S4, S6, S8 of PCU ver 1.90
1.6 S3, S4, S6N, S8 of PCU ver 1.93
1.6.1 S3, S4, S6, S6N, S8 for PCU ver 1.94
V-SAT(Select the V-SAT icon) S8P, S10, S12 of PCU ver 1.924(Select the
1.7
V-SAT icon) A6, A9 of PCU ver 2.00(Select the TV-RO or A-Series icon)
V-SAT, S10, S12 of PCU ver 1.925(Select the V-SAT icon) A6, A9, S4, S6,
1.7.1
S6N, S8 of PCU ver 2.11(Select the TV-RO or A-Series icon)
V-SAT, S10, S12 of PCU ver 2.000(Select the V-SAT icon) A6, A9, S4, S6,
1.7.2
S6N, S8 of PCU ver 2.11(Select the TV-RO or A-Series icon)
1.8.1 K4 of PCU of PCU ver 1.000
Table 4-1 SCS Version
38