Graph; Graph View - KNS SUPERTRACK S4 Installation And Operation Manual

Graph

You can see the antenna parameters graph by SCS. Refer to below step.
a. Select item('Reference', 'CurSate', 'Error', 'Voltage'),
b. Select sub menus(1~9), then click the 'on' button of selected submenus.
c. Click the "Axis Set' to set the axis set, then change maximum and minimum
value of graph.
d. Click the 'Data OFF' to see the graph.
e. Click the 'Data ON' to stop the graph.
4. Click the Data OFF
to Run the Graph
1. Select the
Desired Item
3. Set th Max and
Min Value of Graph
2. Click the ON
to Select the Submenus
Figure 4-28 Graph View
NOTE: Click the 'HELP' button, then you can see the index of graph.
63