Operation; Front Panel Functions; Packet Loss - KNS SUPERTRACK S4 Installation And Operation Manual

3. Operation

3.1. Front Panel Functions

1. MENU button – Press the MENU button for more than 3 seconds to enter the set-up
mode. When you want to escape from the set-up mode, press MENU again for more
than 3 seconds. Another function of the MENU button is that of checking the error
message when the S4 makes an error. When the error LED is on, press the MENU
button briefly. Then, you will be able to see the hexadecimal error message. Please
press the NEXT button for about 2 seconds to clear the error. If you press MENU briefly
again, you can go back to normal operation.
NOTE: Operator can make sure the communication status of ACU and antenna as
below when press MENU and press SEARCH shortly again. Packet means the number
of command from ACU, loss means the number of loss on the PCU. The more loss this
display, communication status is not good.
2. TRACK button – Press the TRACK button to enter the stall mode. The antenna does
not move from the position when the TRACK button is pressed. This button is also used
to scroll left (◀) in the menu.
3. NEXT button – Press the NEXT button to select your preprogrammed next satellite.
When your desired satellite is displayed, stop pressing NEXT, and then, after 3 seconds,
the antenna automatically searches for your desired satellite.
Use this button when you want to scroll right (▶) in the menu.
4. M/C button – Press M/C for more than 3 seconds to enter computer link via RS 232.
When you want to escape from computer link, press M/C for more than 3 seconds. This
button is also used to scroll up (▲) in the menu.
Figure 3- 1 Packet Loss
22